Mini XMega Experiment Board

Julkaistu: 2015-10-25

Mini XMega Experiment Board (MXMEXB) is a very simple starter kit for developing code and making small prototypes with the Atmel ATXMega microcontroller. It is very easy to try out different various sensor, components and extensions with the integrated breadboard area.

Features

Atmel ATXMega32A4U microcontroller
USB interface for downloading user programs and for serial interface
Powered from USB bus protected with a fuse and a diode
PDI-programming and debugging interface
4 push-buttons
4 LEDs
170 connection point breadboard for prototyping
I/O ports accessible through pin header connectors (excluding those connected to switches and LEDs)
Pre-programmed boot loader and a default test software
Easily reprogrammed with USB cable and the pre-programmed boot loader
Debugging and programming via PDI-interface with Atmel JTAGICE mkII, AVR Dragon, JTAGICE3, and AVR ONE! debugging tools.
Can be optionally programmed with Atmel ISP mkII In-System Programmer

Files

Document: MXMEXB Document ver2

Code snippets from the document:

#include <avr/io.h>
#define F_CPU	2.0E6	// default CPU clock frequency is 2 MHz
#include <util/delay.h>			

int main(void)
{
    PORTC.DIR = 0x0F;		// set four lower bits of PORTC to output
	
    while(1)
    {
        PORTC.OUT = 0x00;	// all leds off
        _delay_ms(200);		// 200 ms delay
        PORTC.OUT = 0x0F;	// all leds on
        _delay_ms(200);		// 200 ms delay
    }
}

#include <avr/io.h>

#define F_CPU 2.0E6 // default CPU clock frequency is 2 MHz

#include <util/delay.h>

int main(void)

{

PORTC.DIR = 0x0F; // set four lower bits of PORTC to output

while(1)

{

PORTC.OUT = 0x00; // all leds off

_delay_ms(200); // 200 ms delay

PORTC.OUT = 0x0F; // all leds on

_delay_ms(200); // 200 ms delay

}

/*
 *  Knight Rider light 
 *
 *  Created: 24.10.2015
 *  Author: JKo, Tietomyrsky
 */ 

#include <avr/io.h>
#define F_CPU	2.0E6  // default CPU clock frequency is 2 MHz
#include <util/delay.h>

int main(void)
{
    uint8_t leds = 0x01;        // start from right
    uint8_t i;
	
    PORTC.DIR = 0x0F;           // set four lower bits of PORTC to output
	
    while(1)
    {
        for (i=0; i<4; i++)
        {			
            leds <<= 1;             // rotate left
            PORTC.OUT = leds;       // show next figure
            _delay_ms(100);         // 100 ms delay
        }

        for (i=0; i<4; i++)
        {
            leds >>= 1;             // rotate right
            PORTC.OUT = leds;       // show next figure			
            _delay_ms(100); // 100 ms delay
        }				
    }
}

* Knight Rider light

* Created: 24.10.2015

* Author: JKo, Tietomyrsky

#include <avr/io.h>

#define F_CPU 2.0E6 // default CPU clock frequency is 2 MHz

#include <util/delay.h>

int main(void)

{

uint8_t leds = 0x01; // start from right

uint8_t i;

PORTC.DIR = 0x0F; // set four lower bits of PORTC to output

while(1)

{

for (i=0; i<4; i++)

{

leds <<= 1; // rotate left

PORTC.OUT = leds; // show next figure

_delay_ms(100); // 100 ms delay

}

for (i=0; i<4; i++)

{

leds >>= 1; // rotate right

PORTC.OUT = leds; // show next figure

_delay_ms(100); // 100 ms delay

}